RX24型鋁外殼功率線繞電阻器
RX24 Type Aluminum Shell Wire Wound Resistors
主要特點：使用金屬鋁殼散熱器，體積小、功率負荷大。由于采用了硅酮樹脂或硅砂樹脂封裝，產品具備了良好的絕緣性能和理想的導熱功能。適用于在散熱板上安裝。
Chief Characteristic: Due to use metal aluminum shell radiator therefore, they are possess small value high power load. Due to the adoption of silicone resin or silica sand encapsulation, the products with good insulation performance and the ideal thermal conductive function. Suitable for cooling plate installation.
主要用途：一般用于直流或低頻交流電路中。若用于高頻電路時，應訂購無感電阻器，訂貨時需聲明，無感電阻器在產品標志前加“N”。
Chief Purpose: Used in DC or low frequency AC circuits. If used in high frequency circuit, it shall order non-inductive resistor, need to declare when you order it, non-inductive resistor with "N" in front of the product logo.
外形圖/Contour Drawing
技術標準/ Technology Standard
1. GB/T 5729-2003
2. Q/QH1633-2014
結構尺寸/Structure Size
使用注意事項/Using Note：
電阻器使用時應配備相應規格的散熱散熱板/器，如無配備，功率負荷應減半。
When using the resistor, you should be equipped with the corresponding stallone of the heat radiator panels, if no equipped with, the power load should be cut in half.
功率負荷曲線
Power Load Curve
主要性能參數/Chief Property Parameters
認證試驗主要試驗項目及要求
Chief Testing & Testing Requirements for the Authentication Testing
